Wiring Connectors - Omron CS1W-MC221 - 02-2008 Operation Manual

Wiring
2-3-4

Wiring Connectors

1,2,3...
118
1. Pass each wire through heat-shrink tubing.
2. Spot-solder the wires and connector terminals.
3. Solder the wires.
1 mm
Heat-shrink tube
Inner diameter: 1.5, r=10
4. Pull the heat-shrink tubing back over the soldered area and heat the tubing
to shrink it.
Section 2-3
Soldering gun
Heat-shrink tube