Connecting To The Mc Unit - Omron SYSMAC CVM1-PRO01-V1 Operation Manual

Connecting to the MC Unit

3-1

Connecting to the MC Unit

Connecting Cables
Attaching the Keysheet
Installing the ROM Cassette
22
The procedure for connecting the Teaching Box to the MC Unit is described be-
low.
Note 1. Be sure that the power supply is turned OFF before mounting or removing
the ROM Cassette.
2. For a connecting cable with a lock mechanism, be sure that the lock is se-
curely fastened.
Use the connecting cables listed below (sold separately) to connect the Teach-
ing Box to the MC Unit.
Model
CV500-CN224
CV500-CN424
CV500-CN624
Attach the Keysheet to the MC Unit as shown below.
Install the ROM Cassette as shown below, and secure it with a M3 x 5-mm screw.
ROM Cassette
Cable length
2 m
4 m
6 m
Section 3-1
Screw hole