Mode (Rfc 2544 Benchmarking) - Juniper ACX1000 Configuration Manual

mode (RFC 2544 Benchmarking)

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
Copyright © 2017, Juniper Networks, Inc.
mode (initiate-and-terminate | reflect);
[edit services rpm rfc2544-benchmarkingtests test-name
Statement introduced in Junos OS Release 12.3X53 for ACX Series routers.
Specify the test mode for the packets that are sent during the benchmarking test.
—Causes the test frames to be initiated at the router and the
initiate-and-terminate
reflected back frames to be terminated. This mode requires a reflector to be
configured at the peer end of the network to return back the generated frames.
reflect —Causes the received test frames to be reflected back on the configured service
(for example, bridge, inet, ccc).
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
RFC 2544-Based Benchmarking Tests Overview on page 1335
Configuring RFC 2544-Based Benchmarking Tests on page 1341
rfc2544-benchmarking on page 1698
Chapter 41: Configuration Statements
test-name]
1621