Juniper ACX1000 Configuration Manual page 1667

Required Privilege
Level
Related
Documentation
Copyright © 2017, Juniper Networks, Inc.
—(Optional) Percentage of the maximum number of prefixes that starts
threshold value
triggering a warning. You can configure a percentage of the
starts triggering the warnings.
Range: 1 through 100
NOTE: When the number of routes reaches the
still installed into the routing table while warning messages are sent. When
the number of routes reaches the
are rejected.
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Limiting the Number of Paths and Prefixes Accepted from CE Routers in Layer 3 VPNs
on page 841
Chapter 41: Configuration Statements
prefix-limit
value, routes are
threshold
prefix-limit value, then additional routes
value that
1609