Default
Options
Required Privilege
Level
Related
Documentation
Copyright © 2017, Juniper Networks, Inc.
By default, the untagged packets are dropped. That is, if you do not configure the
option, the untagged packets are dropped.
native-vlan-id
—VLAN ID number.
number
Range: (ACX Series routers and EX Series switches) 0 through 4094.
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Configuring Mixed Tagging Support for Untagged Packets
Configuring Access Mode on a Logical Interface
Configuring the Native VLAN Identifier (CLI Procedure)
Understanding Bridging and VLANs on EX Series Switches
flexible-vlan-tagging
Understanding Q-in-Q Tunneling on EX Series Switches
no-native-vlan-insert
Sending Untagged Traffic Without VLAN ID to Remote End
Chapter 41: Configuration Statements
1633