Max-Unknown-Messages - Juniper ACX1000 Configuration Manual

max-unknown-messages

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
Copyright © 2017, Juniper Networks, Inc.
max-unknown-messages messages-per-minute;
[edit protocols pcep pce pce-id]
Statement introduced in Junos OS Release 12.3.
Support for PTX Series added in Junos OS Release 14.2.
Support for QFX10000 switches added in Junos OS Release 16.1R3.
Support for ACX Series added in Junos OS Release 17.1R1.
Specify the number of unknown messages per minute that the Path Computation Client
(PCC) can receive at maximum after which the PCEP session is closed.
messages-per-minute —Number of unknown messages per minute that the PCC can
receive at maximum after which the PCEP session is closed. Recommended value
is . If the number of unknown messages received by the PCC is greater than or equal
5
to the maximum number, the PCEP session is closed.
Range: 1 through 16384
Default: 0 (disabled or no limit)
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
pce on page 1655
Chapter 41: Configuration Statements
1605