Mode (Chassis Alarm Relay Input And Output) - Juniper ACX1000 Configuration Manual

Required Privilege
Level
Related
Documentation

mode (Chassis Alarm Relay Input and Output)

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
Copyright © 2017, Juniper Networks, Inc.
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Enabling MLD on page 671
show mld group
show mld interface
show mld statistics
clear mld membership
clear mld statistics
mode (close | open);
[edit chassis alarm relay input port
[edit chassis alarm relay output port
Statement introduced in Junos OS Release 12.3.
Configure relay mode in the deactive state—normally closed or normally open.
close—Normally closed (NC). Electrical current flows through the contacts when operating
normally. When the current stops flowing, the open alarm is generated.
open—Normally open (NO). Electrical current does not flow through the contacts when
operating normally. When the current flows, the closed alarm is generated.
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
User-Defined Alarm Relay Overview on page 158
Alarm Contact Port (Hardware Topic)
show chassis craft-interface on page 1865
show chassis alarms on page 1845
Chapter 41: Configuration Statements
port-number ]
port-number ]
1619