Maximum-Paths - Juniper ACX1000 Configuration Manual

ACX Series Universal Access Router Configuration Guide

maximum-paths

Syntax
Hierarchy Level
Release Information
Description
Options
1606
maximum-paths path-limit <log-interval seconds> <log-only | threshold value>;
[edit logical-systems logical-system-name routing-instances routing-instance-name
routing-options],
[edit logical-systems logical-system-name routing-options],
[edit routing-instances routing-instance-name routing-options],
[edit routing-options]
Statement introduced in Junos OS Release 8.0.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Statement introduced in Junos OS Release 11.3 for the QFX Series.
Statement introduced in Junos OS Release 14.1X53-D20 for the OCX Series.
Configure a limit for the number of routes installed in a routing table based upon the
route path.
NOTE: The
maximum-paths
statement. The
destinations in a routing instance. For example, suppose a routing instance
has the following routes:
OSPF 10.10.10.0/24
ISIS 10.10.10.0/24
These are two routes, but only one destination (prefix). The
limit applies the total number of routes (two). The
applies to the total number of unique prefixes (one).
log-interval seconds —(Optional) Minimum time interval (in seconds) between log
messages.
Range: 5 through 86,400
log-only —(Optional) Sets the route limit as an advisory limit. An advisory limit triggers
only a warning, and additional routes are not rejected.
—Maximum number of routes. If this limit is reached, a warning is triggered and
path-limit
additional routes are rejected.
Range: 1 through 4,294,967,295 (2
Default: No default
—(Optional) Percentage of the maximum number of routes that starts
threshold value
triggering a warning. You can configure a percentage of the
starts triggering the warnings.
Range: 1 through 100
statement is similar to the
statement limits the number of unique
maximum-prefixes
32
– 1)
maximum-prefixes
maximum-paths
maximum-prefixes
path-limit value that
Copyright © 2017, Juniper Networks, Inc.
limit