Honda Prelude 1993 Service Manual page 66

Engine Removal/lnstallation
lcont'd)
l
i'
40. Remove the rear mount bracket
41. Remove the front mount bracket.
BEAR STIFFENER
5-26
42. Remove the lelt side engine mount.
4 3 . Remove the
bracket.
transmrsslon
and mount
44. Raise the chain hoist to remove all slack from the
chain.
45. Check that the engine is completely free of vacuum
hoses, fuet and coolant hoses, and elect.ical
wiring.
46, Slowly raise the engine approximately 150 mm {6
a n ) .
Check once again that all hoses and wires have
been disconnected trom the engane.
47. Raise the engine allthe way and remove it Jrom the
car.