Windshield Installation - Honda Prelude 1993 Service Manual

Windshield
lnstallation
1. Scrape the old sdhssiv€ smooth with a knile, to I
thicknsss of sbout 2 mm (0.O8 in) on tho bonding
surlaca around the entir€ windshieH oponing tlangs.
NOTE;
. Do not scrape down to the p8intsd surface of the
body; damsged psint will interfere with prop8r
bonding.
. Remove the rubber dsm and fsst€ners from the
bodv.
o Mask of{ surrounding surfaces bstore p8inting.
2.
Clean tho body bonding surfscs with a sponge
damDened in slcohol.
NOTE:
After cleaning, keep oil, grease or water from gatting
on the sulfaca.
3.
]f ths old windshieH is to be reinstslled, use I putty
knife to scraDs off all trscss of oH 8dhesiv8, thon
clean the wlndshisld surfac€ with slcohol wh6re new
sdhesive is to be appliad.
NOTE:
Mak€ sure the bonding sutfecs ia kept 1166 ot watsr,
oiland gre8se.
CAUTION:
Avoid s€tilng tho wlrdshl.H on h3 edlps; tmd.filpE
may hsr dovobp Into clrckt.
NOTE:
Clean the shadowed 8reE.
WINDSHIELD
20-16
WINDSHIELD
4.
Glue the rubber dams to the inside faca of th€
windshield as shown, to contain the sdhssiv€ durim
installation,
NOTE;
Be careful not to touch th€ windshield whsro adhssivg
willbe aeplied.
65 mm
326.5 mm
12.56In) {12.a5 In}
RUEBER DAMS
95 mm (3.74 hl
9 m m
10.35Inl
WIiDSHIELD
WI DSHIELD
Glu6 the csntor and upp€r fastsn€rs to the inside taco
ol tho windshislJ as shown,
66 mm
326.5 mm
(2.56Inl h2.85 Inl
I,,PP€R
FASTEiER
(2)
CE TER
FASTET{ER
FASTEI{ERS
5.
95 mm 13.74 lnl
WhIDSHELD