Honda Prelude 1993 Service Manual page 157

3. Hold the rocker arms together with a rubber band to
prevent them trom separating.
Remove the intake and exhaust rocker shaft orifice.
NOTE: The shapes of the rocker shaft ori{ices of the
intake and exhaust are difterent. ldentify the parts as
they are removed to ensure reinstallation in the original
locations.
4.
RUBBER BAND
Screw 12 mm bolts into the rocker arm shafts. Re-
move each rocker arm while slowly pulling out the in-
lake and exhaust rocker arm shafts.
BOCKER ARMS
12 mm EOLTS
ROCKER SHAFT
6-89