Honda Prelude 1993 Service Manual page 755

Hide thumbs Also See for Prelude 1993:

Table of Contents

Check the 4-way valve.

Inspect its surface for scoring or scratches.

Slip it into the valve body, and make sure

slides smoothly. without drag or side play,

Check for scoring,

scratches, or rough

NOTE: lf the valve body is damsged, replace the

valve body unit (valve body, pressure control valve,

gain control valve,4-way valve) as an assembly.

Using a 3 mm (1/64") drill bit, remove the sensor

oriJice and 3.4 m O-ring,

PORT HOUSING

Troubleshooting