Transmission; Toroue Converter - Honda Prelude 1993 Service Manual

Transmission
2.
Flush ths ATF cooler as described on psges 14-142
and 143.
lnstall the stsrter motor on the torque converter
housing, and inst8llthe two 14 x 20 mm dowel pins in
the torque converter housing,
45 N.m 14.5 kg-m ,
ATARTER MOTOR
33 tuft)
lnstallation
1 .
DOWEL PIN
1 4 r 2 0 m m
DOWEL PIN
'14 x 20 mm
TOROUE CONVERTER
ASSEMBLY
4.
Place the transmission on I jack, and raise to th€
engine 8ss€mbly level.
Attach the transmission on the engine, then install the
transmission housing mounting bolts, raar engine
mounting bohs and intake maniJold bracket botts.
Roplaca.
I1{TAKE MANIFOLD
BRACKET
INTAKE MANIFOLD
ERACKET BOLTS
I x 1.25 mm
2. N.rn 12,2 kg-m ,
16 tb-ft)
TRANSMlsSION
HOUSING
MOUNTING BOLTS
12 r 1 .25 mm
65 N.m (6.5 kg-m ,
47 tb-ft}
TRAfISMISSK)N JACK
REAR ENGINE MOUNfiNG
BOLTS
12 x 1.25 mm
R€plac€.
55 N.m (5.5 ks-m ,40 lb-ft)
14-138
5.
Installth€ transmission housing mounting bolts.
TRAI{SMISSION
HOUSI G
MOUiITING BOLTS
12 r '1.25 mm
65 N.m (6.5 kgtsm ,47 lb-ft)
o .
Tighten the front
sp6cified torque.
engine mount bracket bolts to
FROT{T EI{GII{E MOUNf
BRACKET BOLTS
10 x 1.25 mm
39 N.m (3.9 ksFm , 28 lb-ft)
FNOI{T E GINE
MOUNT BRACKET
FROI{T E'{GINE
MOUl{f