Honda Prelude 1993 Service Manual page 832

12. Remove the splssh guard from the knuckle.
13. Remove the parking brake cable trom the knuckle.
1 4. Remove the wheel sensor wire bracket. then remove
the wheel sensor from the knuckle.
NOTE: Do not disconnect the wheel sensor wire.
WHEEL SENSOR
PARKING BRAKE CABLE
l'-
18-29
1 5. Remove the rear spindle assembly from the knuckle.
SELF-LOCKING NUT
1 0 x 1 . 2 5 m m
Replace.
1 6 .
ASSEMBLY
Hold the ball pin of the stabilizer tink with a hex
wfench and loosen the self-locking nut.
Remove the selflocking nut, then disconnect the
slabilizer link from the stabilizer bar.
1 2 r 1 . 2 5 m m
Replace.
{cont'd)