Latch Rephcement - Honda Prelude 1993 Service Manual

Doors
Latch Rephcement
NOTE:
R8ise ths glass fu[y.
1. Removs:
r Door panel(see page 2G3)
. Plastic covor (see page 2G4)
. Center sssh (8€€ page 2G7)
. Out€r handls {see page 2G5)
2.
Disconnoct the inner handle rod and lock rod from the
inner handle and lock crank.
Rsmove the scrsws, then remove the inner handle and
lock crank,
NOTE:
Tak6 care not to bend the rods.
FASTEI{ER
20-6
Disconnect the connector and harness clip from the
door, Remove the mounting screws, then remove the
latch through the hole in the door.
NOTE;
Take care not to bend the lods.
OUTER HAM'LE
ROD
iloul{Tllrlc SCREWS
6 r 1 . O m m
5 N.m (0.5 kg-m ,
3,8 b-frl
HARNESS CLIP
4. lnstallation is the reverse of the removal Drocedur€.
NOTE:
Make sure the rods and connector are fasten€d
correctly.