Seat Behs - Honda Prelude 1993 Service Manual

Seat Behs
Inspection
RciEcto? hapoctlon
1. B€tor6 installing tho retractor, check thst ths ssat b€h
can be pulled out fr66ly.
2.
M€ko sur€ that ths ssat beh does not lock when th€
retractor is l6an€d alowly up to 15" flom the mountod
oosilion. Th€ seat beh should lock when ths ratractor
is leaned ov€r 4.0o.
GAUTlOlt:
Do not attempt io dls$romble tho lotraclor.
r: Mountld Poitloti
Forwlrd
-
I
hrld.
h.ld.
with 8 now ons if thers is anY
On-tho-Car Sost Beh Inlpoction
1.
Check thst the s6st belt is not twisted or caught on
anything.
After installing the anchors. check for Jree movement
on the anchor bohs. lf necessary, remove the anchor
bohs and check thst the washers and other Darts are
not damsgad or improperly inst8lled.
Check the sest behs for damage or discoloration.
Cl68n with a shop towel if necessary
CAUTION:
Uso only 3oap and wator to clean.
NOTE:
Dirt build-up in ths metal loops of the upper anchors
can cause tha seat behs to retract slowly.
WiDs the inside of the loops with 8 cl€8n cloth
dampon€d in isopropvl alcohol.
Check that the seat belt does not lock when pulled out
slowv. The 8€8t beh is designed to lock only during a
sudden stop or impact.
Make sur€ that the seat belt will tetract sutomaticslly
wh6n r€lgasad.
6.
ReDlscs the seat beh with 8 new one if there is any
abnormality.
2.
t ,
RETBACTOR
Forw!.d
Replace th€ s6at belt
abnormality,
20-46