Honda Prelude 1993 Service Manual page 101

e-
'1
4. Lock the timing belt adjuster arm in place by installing
one of the 6 x 1.0 mm lower cover mounting bolts,
15. Loosen the timing belt adjusring nut. push on the pu!
ley to remove tension trom the timing balancer belt,
then tighten the adjusting nut.
1 6. Remove the timing balancer belt.
NOTE: It you are removing only the timing balancer
belt, goto step 22. lf you are removing both belts, con,
tinue with this procedure.
TIMING BELT
ADJUSTER ARM
17. Loosen the 6 x 1.0 mm lock bolt and the adjusting nut.
Push on the timing belt adjuster pulley to remove ten-
sion from the belt, then tighten the adiusting nut.
18. Remove the timing belt.
19, Install the timing belt in the reverse order of removal.
Adjust the valve clesrances (page 6-34)
- Betore installing the riming b€lt, the crankshaft and
camshaft pulleys as shown on page 6-28.
2O. Perform the timing belt tension adjustment lpage
6-26).
21 . Tighten the 6 x 1.0 mm bolr to tock the timing belt ad-
aDJUsnNG NUT
Juster arm'
45 N.m 14.5 kg-m, 33lb-tt)
(cont'd)
)o
t
DRIVE PULLEY
6 - 3 1