Honda Prelude 1993 Service Manual page 871

Rear Caliper
Reassembly (cont'd)
19-26
15. Coat the outside of the Diston with brake fluid and
install it on the adjusting bolt while rotating it
clockwise with the sDecial tool
CAUTION: Avoid damaging the piston and piston
boot.
EXTENSION 8AR
Commercially
available
16. Install the pad spring on the caliper.
17. Install the brake pad retainers and brake pads.
18. Align the cutout in the piston with the tab on the
n e r p a d { s e e p a g e 1 9 - 1 9 ) .
tn-
PAD SPRING
19. Install the caliper on the caliper bracket and tighten
the caliper mounting bolts.
20. Connect the brake hose to the caliper with new
sealing washers and tighten the banjo bolt.
CALIPER MOUNTING BOLTS
23
.m (2.3 kg-m, l7 lb-ft)
CALIPER BRACKET
BAI{JO
BOLT
35 N.m 13.5 kg-m.
25 rb-ft|
CALIPER
21. Insen the parking brake cable through the arm and
connect the parking brake cable to the lever with
the clevis pin and lock pin.
Install the cable clip securely.
LOCK PIN
CABLE CLIP
22. Fill the brake reservoir up and bleed the brake
s y s t e m ( s e e p a g e 1 9 - 1 2 ) .
23, Operate the brake pedal several times, then adiust
the parking brake (see page 19-51.
PARKING BRAKE