Backlash Inspection; Final Driven Gear Replacement - Honda Prelude 1993 Service Manual

Differential (Manual Transmissionl
Backlash Inspection
1. Place differential assembly on V-blocks and inst8ll
both driveshafts.
2.
Measure the backlash of both pinion gears.
Standard {Newl: 0.05 - O.'15 mm
10.002 - 0.006 in)
PINION GEARS
DIAL INDICATOR
lf the backlash is not within the standard, replace
the differential carrier.
Final Driven Gear RePlacement
1,
Remove the bolts in a crisscross pattern in several
steps, and remove the final driven gear from the dit-
ferential carrier.
NOTE: The final driven g€ar bolts have left-hand
threads,
10 mm EOLT
103 N.m (10.3 kg-m, 74lb-ft|
Install the final driven gear by tightening the bolts
in a crisscross Dattern in several steps.
t
Chamfer on inside diametor
of final driven goar facos carraer'
1 5 - 4