Honda Prelude 1993 Service Manual page 707

{From page 17 601
Measure the voltage betweon the
4WS control unit side No. 6 ter
m i n a l ( B L U / G R N ) a n d b o d y
gtouno,
ls there approximately 4.5 V?
Disconnect the 4WS controlunit
18P connector.
Check tor continuity between the
4WS control unit No 13 terminal
{BLU/GRN) and body ground.
Connect the 4WS control unit
l8P connector.
Measure voltage between the
4WS control unit No. 1 3 terminal
(BLU/GRN) and body ground.
ls there approximately 4.5 V?
Raolace the 4WS control unit.
R6pai. op.n in the BLU/GRN wire
botween tho 4WS control unit and
tho ioaa main Stoaring anglg
sensor.
REAR MAIN STEERING ANGLE SENSOR
4WS CONTROL UNIT SIDE CONNECTOR
.-rnfl-
a / F
v l 5 , l , / t )
( V ) a . s v r
Y
View trom terminal side
4WS CONTROL UNIT 18P
SENSOR SIDE CONNECTOR
V i e w f r o m t e r m i n a l s i d e
YES
ReDai. short in the BLU/GRN wire
between the 4WS control unit and
the rear main stgoring angle
sensor.
4WS CONTROL UNIT 1AP CONNECTOR
V i e w f r o m t e r m i n a l s i d e
{To page 17-62)
1 7 - 6 1