Honda Prelude 1993 Service Manual page 972

Fold the s6at-b8ck cover 8nd pad back until you can
see the seat-back mounting bolts.
NOTE:
Tsks care not to damage the pad.
R€move the seat-back and s68t cushion mounting
bolts and pivot nut, thon remove the soat-back End
seat cushion from the inn€r and outsr ssat tracks.
PlvorNur Pvor wAsHER
SEAT-BACK
> | Cllp locltlom
b4; ;-
,/'wqP
w^sHER
il
BUSH
O: Clp loo.tloB
PIVOT I{UT
I x 1.25 mm
2 N'm lz2 ks-m , 16 b-ft)
SEAT
cusHtof{
SEAT CUSHK)]T MOUNTIiIG BOLTS
10 x 1.25 mm
43 N.m (4.3 kg-m ,31 b-ft)
INNER AEAT
TBACK
SEAT HEATER UNIT
To so6t-back.
SEAT CUSHION
REAR
SEAT
accEas
CABLE
To 86at bolt
buckh.
lo rast-back.
Diaconnoct th6 r6ar
366t aCCgSll
cabb.
RECLIiE
AII'USTER
Hoated Soat {C6nada: SR 4wS/SR-V)
SEAT.BACK MOUNIT|NG BOLTS
1O x l,26 mm
43 N.m (4.3 kem .31 b-ft)
SEAT CUSHION MOUI{TING BOLTS
1O x 1.25 mm
43 N.m {4.3 kg-m .31 b-ft}
JOINT ROD
NOTE:
Take c6re not to
b6nd th€ rod.
OUTER SCAT TRACK
7.
lnstallstion is the rsverse of the romoval procodule.
NOTE:
. To prevent wrinkles when installing 8 seat-back cover, makg aurs tho material is stlgtched evsnly ovel ths frame bsfore
securing sllthe clips.
. Apply gtease to the moving surfaces.
20-39