Honda Prelude 1993 Service Manual page 828

Installation
1 . Loosely install ths damper on thg
sligning tab tacing inside.
NUT
1 0 x 1 . 2 5 m m
39 N.m 13.9 kg-n, 28 lb-ftl
trame with the
2 .
Install the damper fork over the driveshaft and onto
the lower arm. Installthe damper in the damper fork
so the aligning tab is aligned with the slot in the
damper tork.
Hand-tighten the bolts and nuts.
Raise the knuckle with a tloor jack until the car just
litls otJ the salety stand.
NOTE: The bolts and nuts should be tightened with
the vehicle's weight on the damper.
Tighten the damper pinch bolt.
Secure the damper tork bolt with I new selflocking
nut.
Secure the damper assembly to the frame with the
flange nuts.
8.
lnstall the brske hose mounting bolts.
BRAKE HOSE MOUNTII{G EOLT
{8 x 16 rml
22 N.m 12.2 kg-m. 16 lb-ft)
a
4 .
5 .
BRAKE HOSE
MOUNTING BOLT
(8 x 20 mm)
22 N.m
DAMPER
BOLT
12.2
16 tb-frt
DAMPER FOBK AOLT
(SELF-LOCKING BOLT)
1 0 x 1 . 2 5 m m
44 N.m (4,4 kg-m,
32 rb-ftt
DAMPER FORK NUT
{SELF-LOCKING NUT}
1 2 x 1 . 2 5 m m
65 N'm (6.5 kg-m, 47 lb-ft)
18-25