Honda Prelude 1993 Service Manual page 771

29.
Install a new O-ring on the piston with
€dge facing out.
Its narrow
30. Coat the piston seal ring guide with power steering
fluid. then slide it onto the rack, big end fifst.
31. Position the new piston seal ring on the special
tool, slide it down onto the big end of the tool, then
pull it otf into the piston groove on top of the O-
ring.
STEERING RACK
32. Coat the piston seal ring and inside of the special
tool with power steering fluid.
33. Carefully slide the tool onto the rack and ove. the
piston seal ring, then rotate the tool as you move it
up and down to seat the piston seal ring.
Coat new O-rings with powe. steering fluid and in-
stall them on the cylinder caD.
43.3 x 1.5 mm O-RINGS
( c o n t ' d r
34.
1 7 - 1 2 5