Opening Drag Gheck - Honda Prelude 1993 Service Manual

Hide thumbs Also See for Prelude 1993:

Table of Contents

Panel Stay/Slider, Lifter and Guide

Rails Replacement (cont'd)

Tu,n the hook ol the snchor rod with I flat tip

screwdriver, then remove the anchor rod and anchor

spring from the guide rsilby sliding it backward.

To install, apply muhi-purpose grease to the hook.

10. Installation is tha revetse ot the r€moval procedure.

. Before installing the guide rail, appv the calking to

guide rail mount faces of the frame.

Opening Drag Gheck

(Motor Removed)

Betor€ inEtalling the motor, measure stfon required to

open sunroof panel using a spring scale as shown

wh.n rFlng a cp ng scals. proiect the loading odgo ot tho

sunroof panel whh a lhop towol.

lf load is over 1O kg (22 lbs), check side clearance and

sunroot panel hoight adiustment {s€€ page 2G29).

ANCIIOR SPRING

. Damaged parts should be replaced'

. Apply grease to the sliding portion.

. Belore installing the motor, adiust the litter to the

same position on each side.

Troubleshooting