Honda Prelude 1993 Service Manual page 180

1 7 .
Timing Belt and Timing Balancer Belt
Replacement {cont'd}
Install the timing belt in the reverse order ol removal.
- Before installing the timing belt, position the crank-
shaft and camshaft pullevs as shown
the auto-tensioner with the maintenance bolt
.l , pointing up. Loosen and remove the maintenance bolt.
NOTE: Handle the auto-tensioner carefully so the
oil inside does not spill or leak. Replenish the auto-
tensioner with oil if any spills or leaks. The total
capacity is 8 cc {1 /4 ii oz).
19. Clamp the boss oJ the auto-tensioner in a vise. Use
Dieces oJ wood or a cloth to protect the boss,
NOTE: Do not grip the housing ot the auto-tensioner.
20. lnsert a flat blade screwdriver into the maintenance
hole. Place the stopper {P/N 1454O-P1 3-OO3) on the
auto-tensioner while turning the screwdriver clock-
wise to comDress the bottom.
,,T" MARKS
TDC
MARK
i
t
'
I
;
I
6-112
NOTE: Take care not to damage the threads or the
gasket contacl surface with the sctewdriver'
MAINTENANCE
BOLT
FLAT BLADE
SCREWDRIVER
STOPFER
P/N 14540-Pl3-003
2 1 .
MAINTENANCE
BOLT
I N.m (0.8 kg-m,
6lb{r)
Remove the screwdriver and reinstallthe maintenance
bolt.
NOTE: Be sure to ube a new gasket.
Replace.
Make sure no oil is leaking around the maintsnance
bolt. Install the auto-tensioner on the engine.
NOTE: Make sure the stopper stays in place.
STOPPER
P/N
8 x 1 . 2 5 m m
22 N.m (2.2 kg-m,
16 rb-ft)