Driveshafts
Removal (cont'd)
11. Pry the driveshaft assembly with a screwdriver as
shown to force the set ring at the driveshaft end
past the groove,
12. Pullthe inboard ioint and remove the driveshaft and
CV joint Jrom the ditferential case as an assembly.
16 - 4
I
INBOARD JOINT
-
with lntermediate Shaft:
Remove the left driveshaft from the bearing sup-
pon by tapping the inboard joint of the driveshaJt
with a Dlastic hammer.
CAUTION:
a Do not oull on the driveshaft. as the CV joint
may come apan.
a Use care whsn prying out the assembly and pull
it stlaight to avoid damaging the diffelsntial oil
s€al.
13, Pullthe knuckle outward and remove the driveshaft
outboard ioint from the front wheel hub using a
olastic hammer.
KNUCKLE
OUTBOARD JOINT