Honda Prelude 1993 Service Manual page 758

Steering Gearbox
Valve Body Unit (cont'd)
'I 1. Make sure the 4-way valve moves
returns to neutrSl Dosition.
smoothly, and
17 - 1 1 2
lnstallation
1 . Coat the 9,8 x 1 .9 mm O-rings with power steering
fluid, and install them together with the orifices.
2.
Installthe valve body unit on the gear housing with
the two 8 mm bolts.
CAUTION;
a When installing, be caleful not to hil th€ pinion
holder pin.
a Mak€ sure the O-rings are in place and not
pinchad,
PINION HOLDER PIN
-6l
PORT ORIFICES
45.5 x 2 mm
O.RING
BODY UI{IT
22 N'm 12.2 ks-m' 16 lb-lil
Connect the four lines to the valve body unit, using
flare nut wrenches.
A: To oil coolor:
17 mm wrench
29 N.m {2.9 kg-m, 21 lb-ftl
B: To power ste€ring spoed aensor:
12 mm wrench
13 N.m (1 .3 kg-m, 9 lb-lt)
C: To rgsorvoir:
12 mm wrench
13N.m (1.3 kg-m, 9 lb-ft)
D: From pump: 14 mm wrench
38 N.m (3.8 kg-m, 28 lb-tt)
9 . 8 x 1 . 9 m m
O-RINGS
E