Honda Prelude 1993 Service Manual page 868

13. Hold the plate with your fingers and turn the shatt
counterclockwise. Remove the sDecial tool from
the caliper.
Remove the adjusting bolt.
Remove the spring cover, adjusting spring B,
spacer, bearing A and cup trom the adjusting bolt.
1 4 .
1 9 - 2 3
1 6 . Remove the sleeve piston, and remove the pin from
the cam.
SLEEVE PISTON
17. Remove the return spring.
18. Remove the parking lever and cam as an assembly
from the caliper body.
CAUTION: Do not loos€n the parking nut with tho
cam installod in tho calipar body. It the lever and
shaft must b6 sopa.ated, hold the levsr in a viso
and looson tho parking nut.
19. Remove the cam boot.
RETURN
SPRIlTG
PARKING LEVER/
CAM ASSEMBLY
PARKI G NUT