Honda Prelude 1993 Service Manual page 765

8 .
9 .
Csretully clamp the gearbox
jaws.
Remove the tie-rod end.
TIE.ROD LOCKNUT
in I vise with soft
1 0 .
\ , ,^@
@-=-47'
1- r_------_1,
V \
TIE.ROD END
Bemove the boot bands and tube clamps. Pull the
dust seals away from the ends of the gearbox.
TUBE CLAMP
1 7 - 1 1 9
1 1 .Hold th€ steering rack with I wrench and unscrew
the rack end with a wrench.
LOCK WASHER
Remove the dust cover.
Remove the gear housing cap from the gear hous-
ing by removing the four 6 mm flange bolts.
Remove the steering pinion seal from the gear
housing cap.
1 2 .
1 3 .
1 4 .
DUST COVER
STEERING PINION SEAL
Replace.
GEAR HOUSING CAP
4 6 r 1 . 5 m m
O.RING
Replace.
(cont'd)
RACK END