Honda Prelude 1993 Service Manual page 952

1 6 .
Scrape or wips ths 6xc63s 8dh68ive off whh a putty
knife or tow6l,
NOTE:
To r6mov6 adhssivs from I Dainted surface or the
windshieH, wipo with 8 solt shop towel damp6n€d
whh alcohol.
Install th6 windshioH moHing.
NOTE:
. Wh6n instslling, make surs th6ra aro no twists in the
molding.
. Install th€ windshield molding by starting Et th6
upper corn9r.
. Glue the upper soction with the Edh83iv8.
> : Clp, r.l!h.r bcltlonr
e WINDS]iELD
-
MOLDIT{G
< ' . f r
#
I
cLrP (31
WIl{DSHIELD
MOLDIT{G
\ k
4
R ETAIT{ER {4}
1 7 . Let ths adh6siv6 dry for 8t l68st one hour, than sprsy
wat€r over the windshisH and ch6ck for l€aks, Mark
loaking Ersas snd l6t th6 windshield dry, then sesl with
saalant.
NOTE:
. Lot th€ car stand for at l€ast four hours aftsr
windshisH install6iton, ll th6 c81 h8s to bs ussd
within th€ first four hours, it muat b6 driv€n slowly.
. K66p ths windshi€H dry for th6 first hour sttol
installstion.
. check rhst the snds ol tho windshield moHing are
sat under ths air scoop.
Reassembls 8ll r6mov6d p8rts.
NOTE:
lnstall th6 r6srvi6w mirror after the adh6siv6 has dri6d
throughly.
1 8 .
2 0- 19