Honda Prelude 1993 Service Manual page 457

P l a c e t h e t r a n s m i s s i o n o n t h e t r a n s m i s s i o n i a c k ,
and raise it to the engine level.
Install the three lower tfansmission mountinq bolts.
6. Install the two upper transmission mounting bolts.
12 x 1,25 mm
65 N.m (6.5 kg-m, 4t lb-ft}
12 x 1.25 mm
65 N.m 16.5 kg-m.
66 N.m (6.5 kg-m, ia1 lb-ft)
O tidhron
10 x 1.25 mm
39 N.m (3.9 kg-m,
7 .
TBANSMISSION
MOUNT
28 tb-ft)
O Tight.n t.mpor..ily
@ Tighron
12 x 1.25 mm
65 N{n (6.5 kg-m, a7 lb"ftl
8. Install the th.ee rear
ing bolts.
R a i s e t h e t r a n s m i s s i o n , t h e n i n s t a l l t h e m o u n t
bracket and transmission mount.
NOTE:
. T o r q u e m o u n t i n g b o l t s a n d n u t s i n s e q u e n c e
snown.
.
Make sure the bushings are not twisted or offset.
O Tighren
10 x 1.25 mm
O Tighten
10 x 1.25 mm
39 N.m 13.9 kg-]n,
tb-ft)
BRACKET
O Tighton
10 x 1.25 mm
39 N.rn 13,9 kg-m,
28 rb-ft)
engjne mount bracket mount-
MOUNTING BOLTS
Replace.
12 x 1.25 mm
55 N.m 15.5 kg-m, 40 lb-ft)
(cont'd)