Honda Prelude 1993 Service Manual page 604

Hide thumbs Also See for Prelude 1993:

Table of Contents

1 7 . Make sure the transmission is inl P lposition.

Then tillthe trsnsmission with ATF and run the engine

for 30 seconds or until approximately 0.95 0 (1.0 US

qt., O.8lmp qt.l is discharged.

Remove the drain hose and reconnect the cooler

return hose to the transmission.

Refill the transmission with ATF to the orooer level

(see p89e 1+74.

TOOL MAINTENANCE

1. Emoty and rinse atter each use. Fillthe can with watsr

and pressurize the can, Flush the discharge lino to

ensure that the unit is clean.

lf discharge liquid does not foam. the orifice may be

To clean, disconnect the plumbing trom the tank at the

large coupling nut.

Remove the inline tiher from the discharge side and

clean if necessary.

5. The Jluid orifice is located behind the fiher.

Clean it with the pick stored in the bottom of the tank

handle or blow it clean with air. Securely reassemble all

Troubleshooting