Gamshaft Pulleys - Honda Prelude 1993 Service Manual

Hide thumbs Also See for Prelude 1993:

Table of Contents

Gamshaft Pulleys

1. To ease reassembly, turn the pulley until the

marks face up, and the front timing marks are aligned

with the marks on the Dullevs.

Remove the timing belt,

Removethe pulley bolts, then remove the camshaft

NOTE: To set the camshafts at TDC for No. 1

cylinder, align the holes in the camshsfts with the

holes in the No. 1 camshaft holders and insert 5 0

mm pin punches.

Align the marks on the pulleys.

NOTE: Do not totate camshaft during inspection'

1. Remove the rocker arms.

NOTE: Rocker arms musi be installed in the same

oosition if reused.

2. Put the camshafts and the camshaft holders on the

cylinder head, then tighten the bolts to the specified

Specifled torque:

Exc8pt Intake @, @. Exhaust @, @:

l0 N'm (1'0 kg'm, 7 lb'ft|

Intake @, @. Exhaust @' @:

12 N'm (1.2 kg-m, 9 lb-ft1

TIGHTEI{II{G SEOUE CE

PULLEY BOLTS

Troubleshooting