Honda Prelude 1993 Service Manual page 174

Cylinder Head
Installation (cont'd)
1 4 . Install the timing belt in the reverse order of removal.
Adjust the valve clearances lpage 6-1 151
- Before installing the timing belt, position the crank-
shaft and camshaft pulleys as shown
CAMSHAFT TDC POSITION:
16. Install the timing belt.
NOTE:
a It the autotensioner has been extended and the
timing belt cannot be installed. remove the auto-
tensioner. @mpress it ard reinstall it {page 6-1 12}.
. Take care not to damage the timing belt when in-
stalling it.
CRANKSHAFT TDG POSITION :
17. Tighten the maintenance bolt to make the auto-
tensioner tunctional.
NOTE: Turn the maintenance bolt bv hand until it
stoos.
TDC MARK ON
1 E
THE FI.YWHEEL
lnstall the special tool on the intake camshaft pulley.
Auto-tensioner
tix€d in ploce.
EXHAUST
CAMSHAFT
PtJLLEY
Auto-tensioner
lunctional.
,,I" MARKS
TDC MARKS
6 - 1 0 6