Honda Prelude 1993 Service Manual page 593

Transmission
SECOI|I'ARY SHAFT
17. Install the differential assembly, countershaft sub-
assembly, mainshatt sub-sssembly, and secondary
shaft sub-assemblv in the torque converter housing.
Reassembly (cont'd)
MAINSHAFT
SUB-ASSEMBLY
SCCONDARY SHAFT
SUB.ASSEMBLY
EEDLE
BEARINGS
THRUST
NEEDLE
BEARING
COUNTERSHAFT
SUB-ASSEMBLY
1 8 .
1 9 .
Install the splined washer, thrust needle besring 8nd
needle bearings on the secondary shaft.
lnstall the needle bearings. countershaft 4th gear,
reverse selector hub, and reverse selector with the
shift fork on the countershaft.
REVERSE SELECTOR
SHIFT FORI(
REVERSE
lnsta in this direction.
TOROUE
COi|vERTER
HOUSING
COUNTERSHAFT
4TH GEAR
NEEDLE BEARIiIG
NEEDLE BEARING
COUNTERSHAFT
20. Turn the shitt tofk shaft so the large chamfered hole is
facing the fork bott hole. Th€n install the shift fork and
the lock boh with a new lock washer, and torque
Bend the lock tab against the boh head
SH|T FORK BOLT HOLE
LOCK WASHER
R€plac6.
LOCK BOLT
6 x 1 . O m m
14 N.m {1.4 kg-m ,
10 rb-ft)
SHIFT FOBK SHAFT
BOLT HOLE
Large chsmt€red hole
facss this way.
2 1 .
lnstsll the secondary shaft 2nd gear, thrust needle
boaring and thrust washer on the socondary shalt.
Install the countershaft reverse gear and 2nd gear on
the countershaft as shown.
THRUST WASHER
COU TERSHAFT
21{D GEAR
THRUST
NEEDLE
BEARIMi
2ND GEAR
COUUTERSHAFT
REVEBSE GEAR
SECONDARY
SHAFT
COUNTERSHAFT
SECONDARY
SHAFT
14-132