Piston Rings - Honda Prelude 1993 Service Manual

Piston Rings
Alignment
1 ,
I
lnstallthe rings as shown.
ldentify rop and second rings by the chamfer on the
edge. Make sure they are in their proper grooves on
the paston.
NOTE: The manufacturing marks must be facing
upwaro.
Rotate the rings in their grooves to make sure they
do not bind.
TOP RING
SECOND RING
\
3.
Position the ring end gsps 8s shown:
SECOND RING GAP
DO NOT position any rinO gap
at piston thrust surfaces.
H23A1, H22Al onginos:
Approx. 90'
Appiox.
90"
OIL RING
GAP
TOP RING GAP
GAP
DO NOT posilion any ring gap
in line with the oiston oin hole.
OIL RING GAP
MARK