Honda Prelude 1993 Service Manual page 762

Steering
Gearbo
Gearbox
Removal lcont'd)
gearDox llemoval lcont q,
16. Lock the steering shaft with ignition key to keep
the steering shaft position.
17. Remove the steering joint bolt, and move the joint
toward the column.
TOOTHED LOCK WASHER
18. Remove the left mounting bracket first, then
remove the right mounting brackets.
AIR HOSE CLAMP
STEERING JOINT
1 9 .
20.
Remove the left-tie rod end, then slide the rack all
the way to the right.
Pull the steering gearbox assembly all the way
down to clear the Dinion shaft lrom the bulkhead.
Move the steering gearbox assembly to the right so
the left rack end clears the rear beam-
Hold the steering gearbox assembly and slide the
rack all the way to the left. Place the left rack end
below the rear beam.
Move the steering gearbox assembly to the left and
tilt the left side down to remove it from the car.
CAUTION: Bo calsful not to bond or damage the
four power aleedng lines when lomoving the gear-
box aasemblv.
21 .
STEERING GEARBOX ASSEMBLY
1 7- 11 6
A
RAq
In6ta
innoa
35.
o{
R.!
z<