Steering Column
Removal (cont'd)
4.
Remove the upper and lower column covers.
Remove the cable reel harness lrom the underside
oJ the column bracket by removing the clip (SRS
o n l v ) .
SRS WIRE HARNESS
CLIP
17-90
6.
Remove the cable reel assembly (SRS only).
CABLE REEL ASSEMBLY
Remove the turn signal canceling sleeve, combina-
tion switch assembly and front main steering angle
sensor (4wS only) by removing the circlip
NOTE: After removing the combination switch as-
sembly, place it on the floor gently so that it does
not hinder you in service. Do not disconnect the ca-
bles from the combination switch assembly.
7 .
C I R C L I P
FRONT MAIN STEERING
ANGLE SENSOR
(4WS Only)
@!
\
TURN SIGNAL
CANCELING
SLEEVE