Glearance Inspection - Honda Prelude 1993 Service Manual

Mainshaft
Glearance Inspection {cont'dl
Measure the clearance between the spacer collar
and 5th gear.
Standsrd:
0.06 - 0.21 mm
(0.002 - 0.008 in)
Ssrvice Limit: 0.3 mm 10.012 inl
lf the clearance exceeds the service limit, measure
distance @ on the spacer collar.
Standard:
26.03 - 26.08 mm
{1.025 - 1.027 in)
Sorvice Limit: 26.01 mm {1.02'l in)
SPACER
COLLAR
sTH GEAR
SIDE
lf distance €) is lesa than service limit, replace the
spacer collar with a new one.
lf distance @ is within the service limit, measure
thickness of sth gear.
Standard:
30.92 - 30.97 mm (1.211 -1.219inl
Service Limit: 30.8 mm 11.213 inl
Disassembly
CAUTION: Remove the synchro hubs using a press and
steel blocks as shown. Use of a iaw.typ€ puller can
damage the gsar teeth,
Remove the ball bearing using a bearing puller as
shown.
BEARING PULLER
BALL BEARING
BAI-L
BEARING
STOPPER
RING
MAINSHAFT
5TH GEAR
lf the thickness of sth gear is less than the service
limit, replace 5th gear with a new one.
l I t h e t h i c k n e s s o f 5 t h g e a r i s w i t h i n t h e s e r v i c e
limit, replace the sth synchro hub with a new one.
13-20