Honda Prelude 1993 Service Manual page 131

Timing Belt
Positioning Crankshaft Before Installing Timing Belt.
NOTE:
. Install the timing belt with the No. 1 piston at TDC.
. After installing, retorque the crankshaft pulley bolt to
22O N.m (22.O ks-m, 159 lb-ft).
CMN(SHAFT TDC FOSITION:
FLYWHEEL
DRIVE PLATE
NOTE: When turning the crankshaft with a socket
wrench, install the crankshaJt pulley and the pull€y
bolt.
POINTERS
ON BLOCK
6-62
,,UP'' MARKS
CAMSHAFT TDC FOSITION:
TDC MARKS
Align the marks
on the pullays.
CAUTIOI{: Romovc thr pln Frnchos attor installlng
th. tlming boh.
PI Pt CHES,5.0 nm