Panel Stay/Slider Lifter And Guide Rails Replacement - Honda Prelude 1993 Service Manual

Panel Stay/Slider Lifter and Guide
r e r r v r v . e t r v
Rails Replacement
1. Rsmovo the frame (see page 2G32).
2.
Remove the front drain channel,
6 r 1 , O m m
10 N.m (t.O ks-m ,7 lb-ft)
o .
Removs the motor (page 2G32).
Remove the mounting screws @, then remove the
guide rail. Remove the mounting screw @, then
remov€ the outer cable assemblv.
NOTE:
Tske care not to bend the cable DiDos.
MOUiITING
SCREW
GROMMET
NOTE;
To install, fill the groove in 6ach
grommot whh seahnt,
FROI{T DRAIN
CHANNEL
CABLE
PIPE
PANEL
STAY
OUTER
CABLE
ASSEMSLY
Slide the p8n6l stay backwsrd, than remove it from
the guide rail.
Remove the lift€r Jrom the inner cable end, then
separats the panel stsy, lifter, slide stoppet link 8nd
slider.
NOTE:
To install, apply muhi-purpose grease to the lifter and
slide stopper link.
Romove the rear drain channel.
Romove the resr rail holder.
8.
SLIDE STOPPER
LINK
GUIDE RAII.
6 x 1 . O m m
10 N.m (1.0 kg-m ,
7 b-ft)
{co.rt d