Honda Prelude 1993 Service Manual page 558

NOTE:
. Cl€sn all parts thoroughly in sotuent or carbur€tor
cle8n€r and dry with compressed air.
. Blow out all p8ss8g€8,
. Whsn removing the vslve body, replsce the following;
. O-rings
. Lock w88h6rs
1. Removs the two bohs securing the servo detent base,
th€n rsmovs ths aervo detent bass.
2. Removs the two bohs sgcuring th6 ATF strsiner, then
removs th€ ATF strainsr.
3.
Remove the oil fe6d pipes from the s€rvo body and
main valve body.
4. R€move the three bofts securing the 4th accumulator
covsr, thsn remove the 4th accumulator cov€r.
NOTE;
Ths 4th accumulator covsr is spring loaded, to
prsvsnt stripping the threads in the s€rvo body, press
down on tha accumulstor cover while unscrewing the
bohs in a crisscross Dsttern.
5. R6move the seven bohs securing th8 servo body, then
removs the sarvo body snd s6parstor plats.
6. Remove the secondsry valve body and soparstor pl8te.
7. Rsmove the seven bohs securing th€ throttle valve
body, then remove the throttle valve body and
soparator plata.
8.
Rsmove the boh securing the regulator vslve body,
then remove the rsgulator vElve body.
9 .
1 0 .
Romove the ststor shsft snd stopper shaft.
Romov€ the dstsnt spring from ths dstsnt arm, thsn
remove the control shaft trom the toroue converter
housing.
Rsmov€ the detent arm snd detent srm shalt from the
m8in v8fus body.
Removo th€ four bohs securing tho main valve body,
th6n r€move th€ main valve body.
Remove the six bofts securing the lst/2nd accumu-
lstor body, th€n rsmovs the 1st/2nd accumulator body.
Remove the oil pump drivon 968r shatt, then remove
the oil pump gears.
Rgmov€ th6 main seDarator Dlat6 with three dow6l
Dins.
1 1 .
12.
1 3 .
1 4 .
1 5 .
14-97