Honda Prelude 1993 Service Manual page 546

Transmission
Removal (cont'd)
n.
E.
R€movo ths torque convorter cov€r and shift csbb
covgt.
R6move ths lock bott sscuring the control l€ver, then
rsmovo the shift cabls with the controllsvsr.
CAUTION:
Tlks care nol to b.nd tha lhlft cable whllo removlng
h.
TOROT,E COI{VERTER
COVER
Rsmovo ths eight drive plate bolts one at a tims whils
rotating th€ cr8nkshEft pulby.
DN|VE PLATC BOLT
6 x 1 . O m m
30.
SHIFT CABLE
DRIVE PLATE
31. Plsce 8 jack und€r the transmission, and raise th€
transmission just enough to take weight oft of the
mount.
32. Romove the intake manitoH bracket.
33, Remove the trsnsmission housing mounting bolts 8nd
rear angine mounting bolts,
34. Pull the transmission away trom the €ngine until it
clesrs the 14 mm dowel pins, then lower it on the
transmission jack.
TRANSMISSION HOUSING
MOUiTTI'{G EOLTS
INTAKE TIAI{IFOLD
ERACKET
TRANSMISSION JACK
14-84