Honda Prelude 1993 Service Manual page 951

Hide thumbs Also See for Prelude 1993:

Table of Contents

lnstallation (cont'd)

Thoroughv mix the adhssive and hardenar together on

a glass or rnetal plate whh a putty knife.

. Clesn 8 glass or metal plate with a sponge and

slcohol before mixing.

. Folow the instructions that come with the adhesive.

Before filling a carttidge, cut the €nd ot the nozzl€ as

cut nozzle end

10 mm (0.39ln}

7 mm 10.27In)

Pack adhssive into the cartridg€ without air pockots

to ensure continuous delivery' Put the csnridge in a

calking gun and run a bead of adhesivo around the

edge of the windshield as shown.

AppW the sdhesive within 30 minutes alter sppving

the glass plimer.

2 mm (o.Og Inl

Make s slghtly thickor bo.d

at 6ach corn€r d upp€r.

Fffi,I\:AD}IESNE

(o.31 lnl (0.04

13. Uso suction cup8 to hold tho windshiold over tho

opening, align h with the slignrnont marks mad€ in stsp

7 and sst it down on the sdhssive. LightlY push on th€

windshi€H until h8 edg6 is fullv seated on the sdhosiv6

sllths wav around.

. Do not closs or opgn tho doors until adhesivo is dry.

. Mako suro the fastonela are fastensd correctlY.

ALIG MEiT il|ARK8

14. Install tho clips on tho windshiold molding.

Troubleshooting