24.
29.
30.
3 1 .
Remove the 6 x 1.O mm bolt from the timing belt ad-
Juster arm.
Remove the crankshaft pultey.
Install the lower cover.
Install a rubber seal around the adjusting nut. Do not
loosen the nut.
6 r 1 . 0 m m
12 N.m (1.2 kg-m, I lb-ftl
ADJUSTING I{UT
1 0 x 1 . 2 5 r n
45 N.m (4.5 kg-m,
33 rb-ft)
PULLEY BOLT
1 4 x 1 . 2 5 m m
22O N.m {22.0 kg-m, 159 lb-ft)
Apply engine oilto the
bolt threads.
Install the upper cover.
Install the crankshaft pulley.
Coat the threads and seating tace oJ the putley bolt
with engine oil. Install and tighten to the specified
rorque.
Specifiod torqus: 220 N.m {22.O kg-m. 159 tb-ft}
SEAL
Replgcs whon damsged
or dsterioratsd.
32.
33.
34.
6 x 1 . 0 m m
12 N.m {1 .2 kg-m, 9 lb'ft}
UPPER COVER
6-33