Honda Prelude 1993 Service Manual page 105

6. Rotate crankshaft 180o counterclockwise (Camshaft
pulley turns 9Oo). The "UP" mark should be at ex-
haust side, Adjust valves on No. 3 cylinder.
Number 3 Piston at TDC:
7, Rotate crankshaft 180o counterclockwise to bring
No.4 piston to TDC. Both TDC g.ooves are once
again visible. Adjust valves on No. 4 cylinder.
Numbor 4 Piston at TDC:
,,UP" MARK
8. Rotate crankshat 180o counterclockwise to bring
No. 2 piston to TDC. The "UP" mark shoutd be at
intske side. Adjust valves on No. 2 cylinder.
Number 2 Pbton at TDC:
6-35