Honda Prelude 1993 Service Manual page 959

Hide thumbs Also See for Prelude 1993:

Table of Contents

Ouarter Glass

lnstallation (cont'd)

', with E spong3, sppv a light coat of glass prirn€r to the

insilo tEco ot tho qusrtsr glass 8s shown, then lightly

wipe it off with gauze or chaesecbth'

. Do mt sppv body prinrel to ths quarter ghss, and

do not gpt body 8nd glass primer spong€a mixed up.

. l{ov€r touch ths primod surtacos with your hsnds. ll

you do, the adhesivs may not bond to the quErter

gl€ss properly, causing a leak sfter ths quartsr gl€as

is instsllod.

. Kegp w8ter, dust, and sbrasivo msteriab away from

the Drimed surfaco.

r'///////, : Af,y fit

OUARTEB GTASA

5. With a sponge, apply 8 light coat oI bodv primer to the

o.iginal adhesive remaining around the quarter 91888

opening fl8nge. Ths quarter glass should be installed 10

minutes after you spply the bodY prim€r.

. Oo not apply glass primer to the body, and be

careful not to mix up glsss 8nd body primer sponges.

. Never touch the primed surfaces with your hands'

; Apply body prlmet hte'

6. Throughv mix the adhesive and hardener together on

a gbss or metal plste with I puttY knife.

o Clean a glass or metsl plate with a sponge and

alcohol before mixing.

. Folbw the instructions that came with the adhesive.

Befor6 tiling a cartridge, cut the end ot the nozzle 8s

cut nozzb end

10 lnm (0.39Inl

38 mm {1.49In}

38 mm (1.49In)

7 mm {0.27 In}

Troubleshooting