Honda Prelude 1993 Service Manual page 753

Valve Body Unit
Disassembly
1. Remove the three 6 mm flange bolts, then remove
the valve body cap trom the valve body.
2. Remove the cap seal trom the valve body cap.
Remove the pressure control valve and valve
from the valve body.
spflng
VALVE BODY
VALVE BODY
6 mm FLANGE BOLT
\, .la
\ ( C
VALVE SPRING
SPRING
17-107
4.
Check the Dressure control valve:
Inspect its surface for scoring or scratchss.
Slip it back into the valve body. and make sure it
slides smoothly without drag and without slde
p l a y .
PRESSURE CONTROL VALVE
Check for scoring or
scratches, and rough
opgration.
NOTE: lf the valve body is damaged, replace the
valve body unit (valve body, pressure controlvalve.
gain control valve,4-way valve) as an assembly.
Remove the gain control valve and valve spring
irom the valve bodv.
VALVE BODY
(conl ct
5 .
4*
VALVE