Total 2 non-active route(s) using 128 bytes
Dell>
Related
show ip route
Commands
show ip traffic
View IP traffic statistics on Z9500 CPUs, including ICMP, UDP, TCP and ARP counters.
Z9500
Syntax
show ip traffic {all | cp | rp}
Parameters
all
cp
rp
Default
View IP traffic statistics from all processors.
Command
EXEC Privilege
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
8.1.1.0
7.6.1.0
7.5.1.0
6.1.1.0
984
— displays information about the routes found in the switch.
(OPTIONAL) Enter the keyword all to view IP traffic
statistics from all processors.
(OPTIONAL) Enter the keyword cp to view only IP traffic
statistics from the Control Processor.
(OPTIONAL) Enter the keyword rp to view only IP traffic
statistics from the Route Processor.
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the E-Series ExaScale.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
IPv4 Routing