Show Bootvar - Dell Z9500 Reference Manual

show bootvar

Display the variable settings for the boot parameters.
Z9500
Syntax
show bootvar
Command EXEC Privilege
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.11.4
8.3.11.1
8.3.7.0
7.5.1.0
E-Series
Example
Dell#show bootvar
PRIMARY IMAGE FILE = ftp://box:password@10.31.1.205//home/
5.3.1/5.3.1.0/FTOS-ZC-9.2.1.0.bin
SECONDARY IMAGE FILE = variable does not exist
DEFAULT IMAGE FILE = flash://FTOS-ZC-9.2.1.0.bin
LOCAL CONFIG FILE = variable does not exist
PRIMARY HOST CONFIG FILE = variable does not exist
SECONDARY HOST CONFIG FILE = variable does not exist
PRIMARY NETWORK CONFIG FILE = variable does not exist
SECONDARY NETWORK CONFIG FILE = variable does not exist
CURRENT IMAGE FILE = ftp://box:password@10.31.1.205//home/
5.3.1/5.3.1.0/FTOS-ZC-9.2.1.0.bin
CURRENT CONFIG FILE 1 = flash://startup-config
CURRENT CONFIG FILE 2 = variable does not exist
CONFIG LOAD PREFERENCE = local first
BOOT INTERFACE GATEWAY IP ADDRESS = variable does not exist
Dell#
Related
boot system
Commands
66
Description
Introduced on the Z9500.
Introduced on the S4820T.
Output expanded to display current reload mode (normal or
Jumpstart).
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the C-Series.
Original command.
— sets the location of Dell Networking OS image files.
File Management